|
Written by b n
|
|
Friday, 29 August 2008 09:26 |
Stopwatch rally by Mesurecom Tempo, answers your questions
1 - What battery uses the Tempo?
The stopwatch "Tempo" uses a 9V battery (also known as PP3, 6F22 or LR22). CAUTION: If you use the product in environments where temperatures are extreme, make sure the battery you are using is designed for use in these temperature ranges.
2 - Can I save my time?
Yes, the Tempo has the potential to store 20 lap times.
3 - What is the maximum stopwatch?
The tempo is up 59m59s99 then it automatically repairs at 0 and continuing to count.
4 - Is it possible to reduce the brightness at night?
Like all devices in the range Mesurecom, the Tempo has the potential to reduce manually or automatically (triggered via the headlights) the brightness of the display.
5 - How to make the product available?
If the panel is too far from the copilot seat, while the latter can not access the Tempo. In this case, use the support available as an accessory, it has holes you can mount it on the side door panel. |
|
Last Updated on Thursday, 17 March 2011 21:43 |
Frequently Asked Question about Mesurecom company
1 – Where can I by Mesurecom's products?
You can buy products directly from the manufacturer: MESURECOM.
You can order by mail, on paper, adding a check payable to Mesurecom, or on our website via a secure transaction by Blue Card or Paypal.
2 – What are the delivery terms?
Delivery terms are defined in the CVG (general conditions of sale). Delivery is guaranteed by carrier Chronopost 48h to France. At this time of delivery, it must add up to 24 to 48 hours for the preparation of orders.
Shipments are automatically insured for France (including Corsica) as well as Belgium, Luxembourg and Switzerland. For other European Union countries, contact us to define the modalities of delivery, usually, delivery take one week.
3 - Where to find spare parts?
Make your request to Mesurecom, then we will tell you how to replace the defective parts under the warranty. Note that even when the product is no longer under warranty, Mesurecom ensure that its suppliers are able to replace the defective parts (at your expense).
For more information about the Regiled Shift-light, Tempo watches and other measuring instruments Mesurecom, refer to sub-section of the FAQ in the menu on the left.
|
|
Last Updated on Thursday, 17 March 2011 21:42 |
|
Frequently Asked Question about Mesurecom Regiled Shift light
1 - What skills does it take to install the product?
Regiled Shift-light is easy to install, whether on vehicles with electronic management, or a vehicle carburettors. Installation takes 15 minutes. Simply grab the tools necessary to connect them son.
2 - What are the connections of Regiled?
The product connects to a 12V after contact and account information signal tower, if you wish, you can also connect the lights to adjust the brightness at night.
3 - How to avoid being dazzled at night?
Regiled Shift-light has different brightness to prevent glare. It can be adjusted manually or automatically at the start of lighthouses.
4 - How preserve the engine during the adjustment?
Regiled Shift-light offers 2 possible settings;
- The first is to save the trigger of the LED at the same rpm that engine is making,
- The second is to mount the engine in mid-scheme to record levels. This helps to avoid running the engine up into the towers, empty during the adjustment,
In one case as in others, the setting can be done while driving.
5 – Will the Regiled Shift light work on a diesel engine?
Yes, Regiled Shiftlight is compatible with diesel engines, it retrieves the information on the alternator.
6 - Is the product compatible with a double ignition coil?
Yes, Regiled Shift Light works mounting either a single or double coil.
7- Why won't my Regiled Shiftlight come on at the desired shift point? First of all, make sure you have power. The LEDs should test after turning the key switch to “on”. Then make sure that RPM signal feed the Régiled Shift-light. 8 – What is a shift-light? A shift light is a warning lamp fitted to vehicles in order to indicate to the driver that maximum RPM has almost been reached. Ideally a shift lamp will illuminate at the engine speed beyond that which delivers the maximum BHP such that the BHP before and after shifting is the same. Accelerating the engine beyond this point is not conducive to rapid acceleration. In use a shift light allows the driver to judge the exact point that a gear change should be carried out without having to glance down at the tachometer. This also increases safety for the driver by keeping his focus on the track at all times. |
|
Last Updated on Thursday, 17 March 2011 21:43 |
Display Mesurecom gear engaged, the answers to your questions about installing
1 - What skills does it take to install the product?
The display of gear position for sequential gearbox is easy to install. Installation takes about 30 minutes. Make sure you have just the tools necessary to connect them son.
2 - What are the connections of Régiled?
The product connects to a 12V signal contact and account information around, if you wish, you can also connect the lights to adjust the brightness at night.
3 - How to avoid being dazzled the night?
The display of gear position Mesurecom for sequential gearbox has a reduction of brightness prevents glare. This is enabled by the push button, with a brief support.
4 - How does one synchronize the display to the gearbox?
The display of gear position Mesurecom for sequential gearbox is available in several versions:
- The standard, scheduled for a box 5 or 6-speed analog sensor (giving a relatively linear information close to 0V to 5V reverse for 5 or 6 speed), in the case of sensors potentiometers and sensors Hall effect.
- The display specific gearbox citroen racing speed sequential 5-speed mounted on the C2R2 and R2MAX, and today are often mounted on 1X, Saxo, 106, etc. in F2000. This box has a digital sensor, and the display has a beam and a specific program.
- The display specific Hollinger boxes for BMW, with a beam and a specific program as well.
5 - What if my sensor does not work?
Mesurecom now offers all the sensors for gearboxes. The most common are available directly on the site for sale online, but others are available, please contact us using the contact section of the site.
6 - What if my harness is damaged?
Mesurecom offers connectors for all the gearboxes, the most commonly found on e-commerce store, but others are managed internally, contact us for your specific needs and wiring harnesses. |
|
Last Updated on Thursday, 31 March 2011 08:56 |
|
